Pool Enclosure Painting – When it is Time?

Your pool area is perhaps the most used spot of your house during summers. The continuous usage and humid weather conditions can cause wear and tear of your pool enclosure. A lot of people overlook the condition of their pool and pool cage and later bear with the unpleasant consequences.

Your pool cage needs evaluation on a regular basis to figure out if it needs a restoration service. We have listed down tips to help you evaluate the condition of your pool to find out if it’s time for your pool enclosure painting.

Examine the Paint

The first and most apparent sign to identify the need to refurbish your pool cage is flaking paint. If its paint is coming off or peeling even from a single spot, don’t leave it like that. If you leave the problem ignored, the paint of your entire enclosure will deteriorate.

At times, paint cracking is not easily noticeable. Make sure to check the screws and fasters of the enclosure. Any bubbling of paint at those points is a sign your pool cage needs a fresh paint job. Another method to examine the paint is by rubbing your hand on the cage. If your hand feels chalky, this means the aluminum coat is coming off. Don’t wait any further and get your pool enclosure painting done before sun exposure causes more harm to it.

Inspect the Screen

Observe if your screen is changing its color or fading. This could be an effect of continuous sun exposure, thereby signifying that your screen will tear down soon. Moreover, check all the corners of the screen where it has been attached. Any cracking or bubbling of paint indicates the need for repainting. Also, don’t forget to look for signs of rips, holes or shreds that need to be taken care of.

Scrutinize the Screws

Conduct a thorough inspection of all the screws and bolts to check for rust. Leaving rusty screws can prove to be very dangerous for your pool. It can weaken the pool enclosure’s structure, and it can fall down in harsh weather conditions like on a windy day or hurricane. Replace its hardware with stainless steel bolts to avoid rusting and ensure a safe pooling experience.

Pool Enclosure Painting – we can help

Hopefully, these tips will give you an idea of evaluating the condition of your pool cage. If you identify any of these signs and feel the need to get your pool enclosure painting done, call Tampa Bay Rescreens on 813-679-1074 or use the contact form to get an answer to your queries by sending an email.

Pool Cage Painting – the basics

We’ve painted hundreds of pool cages, and undoubtedly it’s challenging work. Do not take this the wrong way– we would certainly like to paint your pool enclosure, and we have actually got the procedure down ‘pat’! While the work is challenging we are experts in pool cage painting.

Let’s have a look at why it is so difficult and numerous knowledgeable painters decline the work.

It is exposed from all sides

Wind from North? Every member of the pool enclosure is going to catch capture it. Unlike a wall of your house, pool cage members are exposed to wind, sun, and the elements from all directions. On top of that, they are usually taller than a lot of the surrounding structures. This implies there is no break from the aspects. Things require to be done, quick within a little window of time.

Pool Cages are 3-Dimensional

House walls are flat, while pool enclosure members have 4 sides. Unique care needs to be required to accomplish a full and even protection on all sides. ‘Running’ of the paint takes place easier these 3 dimensional members as the paint in a liquid state makes its way to the edges, and then rounds to the other side.

Paint does not easily bond to aluminum

Metal is one of the trickiest surface areas to paint as the metal doesn’t quickly bond to it. The postponed bonding makes it challenging to get a smooth surface without runs. In areas of peeling paint, or rust, which are typically discovered near connection joints including dissimilar metals, proper actions must be requiring to get these locations into suitable condition for re-finishing.

It can’t be rolled on

If you desire a high quality surface, free from noticeable streaks the paint applied to the screen enclosure can’t happen with a roller. The very best application technique is spray. With a roller, the painting can be done quickly from the ground, or a distance. Utilizing a spray applicator needs the painter to get up close to the pool enclosure using ladders, scaffolding and walkboards. It likewise requires a significant investment in spray application equipment can cost several thousands of dollars. For many painters who do cinder block structures, and interiors an investment into this equipment which they wouldn’t use frequently, simply is not practical.

Open air can quickly lead to over spray

Since the paint particles must travel through the air, over spray can end up being an issue. More attention than typical needs to be given to masking and covering the surrounding location’s to prevent making a mess and getting paint on other surface areas.

Screen Requirements To Be Eliminated

To paint the pool cage, the screen mesh in between each members, and the spline holding it location requires to be removed. Business that specifically do painting do not have the experience do to the re-screening at the end and as trade contractors do not operate their organisation model around contracting out screen work.

Pool Cage Paining done right by the experts

If you need pool cage painting, you simply need to get in touch with Tampa Bay Rescreens. You can do this by calling us at 813-679-1074. Alternately, you can get in touch with us by using our contact form.

Damages done by Hurricane Matthew in Vero Beach? Tampa Bay Rescreens can help!

vero beach hurricane matthewHurricane Matthew devastated the Florida east coast at the end of September. It was responsible for over 1300 deaths and almost $7 billion in damages (source Wikipedia). Homeowners were in a panic who had to evacuate, since they didn’t know what they would find after the storm. This has caused home repair businesses in Vero Beach and Sebastian to be inundated with work, which means the local professionals might need some relief in their repair efforts for such widespread damage. Tampa Bay Rescreens & Repair can help out with these extensive damages caused due to excessive winds, heavy rains, and fallen trees.

You can read from a few of these local news sources about the damages caused in the Vero Beach and Sebastian areas:

Hurricane Matthew Damage in Vero Beach

Hurricane Matthew Damage in Vero Beach (photo courtesy Twitter)

Hurricane Matthew damage in Vero Beach could cost millions

VERO BEACH, Fla. (CBS12 — The beaches are open in wind-whipped Indian River County, but parking in some areas remains difficult due to damage and debris piles.

In Vero Beach at Jaycee Beach, Hurricane Matthew ate up the right side of Ocean Drive.

Read More Here

Vero Beach continues to deal with Hurricane Matthew damage

VERO BEACH, Fla. — Parts of Vero Beach are still dealing with the aftermath of Hurricane Matthew.

The heavy waves pummeled the shoreline and washed away pounds of sand, leaving the parking lot and boardwalk exposed.

Read More Here

Hurricane Matthew menacing Florida coast

Hurricane Matthew’s eyewall teetered just five miles off the Space Coast on Friday morning, as the storm inflicted the most menacing winds and waves that most people in Northeast Florida have not seen in their lifetimes.

Read more here

Don’t leave your pool cage in its damaged state. While repairing the damages, you can also check out our other services, which include pool cage painting, pan roof installation, and pressure washing. Each of these can improve the value of your home and give it a refreshing new look that will last.

At Tampa Bay Rescreens & Repair, we have recently established another foothold in the Vero Beach and Sebastian areas on the east coast of Florida and we are offering our top-notch quality repair service for your damaged pool enclosures and pan roofs. It might be time for your pool enclosure or pan roof to be made more structurally secure for the next big storm that threatens Florida’s east coast.

If you have damages that need to be repaired caused by Hurricane Matthew, please schedule an appointment with Tampa Bay Rescreens & Repair. We service Vero Beach and Sebastian areas, as well as Tampa, St. Petersburg, Clearwater, Dunedin, and Oldsmar. Please call us today at 813-679-1074 or you can also contact us using the button below.

Contact Us Today

Bolster your existing Aluminum Pan Roof with stronger material to keep the Tampa heat out

insulated pan roof, rescreen, tampa, florida

Bolster your existing Aluminum Pan Roof with stronger material to keep the Tampa heat out

As we come into the Summer months in sunny Tampa, Florida, now is the time to take advantage of the the Tampa Bay Rescreens & Repair aluminum pan roofs replacement. Living in Florida means the temperatures are mostly warm to scorching all year long, but a reinforced and structural interlocking insulated panel roof can give your patio an improvement that will not only make it more comfortable for you, but extend your possibilities for home improvement. Here are just a few of the benefits to replacing your pan roof.

Heavy-duty material

Your current aluminum roof might be insulated with a weaker material or may not be insulated at all. Our structural interlocking insulated panel roofs have a high density polystyrene core that can withstand many pounds of pressure and is strong enough that you can walk on it. It also means it offers the valuables underneath it added protection from the elements, such as falling tree branches or other debris.

Better Heat Reduction

Temperatures seem to be extreme for most of the year in Florida, which can be very uncomfortable for both humans and pets alike. The structural interlocking insulated panel roof that can replace your old roof will reduce radiant heat by 20 degrees. A scorching 95-degree day will feel like a comfortable autumn afternoon underneath the insulation, which means you will be more comfortable and your assets will be protected from warping and blistering from constant temperature fluctuations.

Sounds decreased

A heavy rain storm will usually pelt your average aluminum pan roof with water that roars so loudly that all ambient sound are drowned out, making talking, listening to music, or reading a good book nearly impossible. Your structural interlocking insulated panel roof will be able to absorb some of that sound and you’ll be able to enjoy some peace and quiet even with rain pounding on your roof.

Increased Support

The sturdiness of polystyrene is the reason why your structural interlocking insulated panel roof will be strong enough to walk on. Our materials come with a 10 year limited warranty against cracking, crazing, chipping, peeling, blistering or delaminating.  Tampa Bay Rescreens & Repair can customize your roof to the exact specifications you need for superior strength and are engineered to meet or exceed the most rigid building codes.

Please consider the replacement of your pan roof today to protect your investment and keep your Tampa home looking beautiful. Please schedule an appointment with Tampa Bay Rescreens & Repair services Tampa, St. Petersburg, Clearwater, Dunedin, and Oldsmar areas. Please call us today at 813-679-1074 or you can also contact us using the button below.

Contact Us Today