Pool Cage Painting – the basics

We’ve painted hundreds of pool cages, and undoubtedly it’s challenging work. Do not take this the wrong way– we would certainly like to paint your pool enclosure, and we have actually got the procedure down ‘pat’! While the work is challenging we are experts in pool cage painting.

Let’s have a look at why it is so difficult and numerous knowledgeable painters decline the work.

It is exposed from all sides

Wind from North? Every member of the pool enclosure is going to catch capture it. Unlike a wall of your house, pool cage members are exposed to wind, sun, and the elements from all directions. On top of that, they are usually taller than a lot of the surrounding structures. This implies there is no break from the aspects. Things require to be done, quick within a little window of time.

Pool Cages are 3-Dimensional

House walls are flat, while pool enclosure members have 4 sides. Unique care needs to be required to accomplish a full and even protection on all sides. ‘Running’ of the paint takes place easier these 3 dimensional members as the paint in a liquid state makes its way to the edges, and then rounds to the other side.

Paint does not easily bond to aluminum

Metal is one of the trickiest surface areas to paint as the metal doesn’t quickly bond to it. The postponed bonding makes it challenging to get a smooth surface without runs. In areas of peeling paint, or rust, which are typically discovered near connection joints including dissimilar metals, proper actions must be requiring to get these locations into suitable condition for re-finishing.

It can’t be rolled on

If you desire a high quality surface, free from noticeable streaks the paint applied to the screen enclosure can’t happen with a roller. The very best application technique is spray. With a roller, the painting can be done quickly from the ground, or a distance. Utilizing a spray applicator needs the painter to get up close to the pool enclosure using ladders, scaffolding and walkboards. It likewise requires a significant investment in spray application equipment can cost several thousands of dollars. For many painters who do cinder block structures, and interiors an investment into this equipment which they wouldn’t use frequently, simply is not practical.

Open air can quickly lead to over spray

Since the paint particles must travel through the air, over spray can end up being an issue. More attention than typical needs to be given to masking and covering the surrounding location’s to prevent making a mess and getting paint on other surface areas.

Screen Requirements To Be Eliminated

To paint the pool cage, the screen mesh in between each members, and the spline holding it location requires to be removed. Business that specifically do painting do not have the experience do to the re-screening at the end and as trade contractors do not operate their organisation model around contracting out screen work.

Pool Cage Paining done right by the experts

If you need pool cage painting, you simply need to get in touch with Tampa Bay Rescreens. You can do this by calling us at 813-679-1074. Alternately, you can get in touch with us by using our contact form.

Sherwin Williams Direct to Metal Paint best choice for Tampa Pool Enclosures

sherwin williams, paint, pool enclosuresAt Tampa Bay Rescreens and Repair, we use only the best materials in our Pool Enclosure paining service. The Direct-to-Metal (DTM) product line of paints by Sherwin Williams has many benefits that make it stand out among their competitors lower-quality paints. DTM ACRYLIC FINISHING is a 100 % acrylic, water reducible, corrosion resistant finishing for light to moderate industrial use. Developed for new building or maintenance usage and can be made use of straight over prepared substrates. It turns out to be perfect for pool enclosure painting and can easily accompany a rescreening of your pool enclosure.

  • Chemical resistant
  • Deterioration resistant
  • Quick drying
  • Low smell
  • Flash rust/early corrosion resistant
  • Interior/exterior usage

Check out this video about our pool enclosure painting service using the Direct-to-Metal paint by Sherwin Williams:

Painting your pool enclosure is a cost-effective alternative to rebuilding it from the ground up. You could save thousands of dollars and still restore your pool enclosure to its original luster by painting it using our Direct-to-metal paints. Not only is it cost-effective but also environmentally friendly, as you will be recycling your old enclosure to last for years to come. Tampa homeowners who are trying to pinch a penny will be making a sound choice with this alternative and Tampa Bay Rescreens and Repair will do their very best to make sure you get quality service at a fair price.

We use Sherwin Williams Direct-to-Metal paint for your pool enclosure to help your pool cage resist the elements. Please schedule an appointment with Tampa Bay Rescreens & Repair services Tampa, St. Petersburg, Clearwater, Dunedin, and Oldsmar areas. Please call us today at 813-679-1074 or you can also contact us using the button below.

Contact Us Today

Beautify your Tampa home by painting your Pool Enclosure

Beautify your Tampa home by painting your Pool Enclosure

Beautify your Tampa home by painting your Pool Enclosure

A Pool Enclosure is always a great addition to your sunny Tampa, FL home. The experts at Tampa Bay Rescreens & Repair will help you keep your investment in tip-top shape by making that old pool enclosure shine again. If you thought this might cost you too much money, the alternative to building a new pool enclosure is to have it painted. This new service offered by Tampa Bay Rescreens & Repair is both cost-effective and will extend the life of your pool enclosure by protecting it from the elements, including rain and the hot Florida sun. Here are some reasons why you might consider pool enclosure painting services:

Pool Enclosure Rusting

Normally, pool enclosures are either white or bronze. As a pool enclosure ages and is exposed to the elements like sun and rain, the metal can oxidize and create rust or rust streaks on the pool cage in addition to the screws. White pool enclosures will become chalky and leave behind a residue that denotes oxidation of the metal underneath. Even the bronze pool enclosures will show some signs of rust and wear, so painting the enclosure can protect it and restore it to its previous luster.

Pool Enclosure Age

Pool enclosures will typically last 10-12 years at which time you might consider replacing the pool enclosure or, at the very least, replacing the screen materials. If you’re already going to have your pool enclosure rescreened, Tampa Bay Rescreens & Repair can protect your investment by painting the enclosure, which might also make it more appealing by matching the color to the surrounding environment or the home exterior. You can choose from these colors: white, blue, grey, black, brown (earth tones).

Pool Enclosure Price

You can easily spend between $6000 and $10,000 on a new pool enclosure, but now there is a more cost-effective option to have the pool enclosure painted. The costs associated with pool enclosure painting is between $1500 to $2000, which means you will be accomplishing the same goal by protecting and beautifying your home at a fraction of the cost.

Protect your pool enclosure and make it more beautiful with pool enclosure painting servicesTampa Bay Rescreens & Repair services Tampa, St. Petersburg, Clearwater, Dunedin, and Oldsmar areas. Please call us today at 813-679-1074 or you can also contact us using the button below.

Contact Us Today